Lever Limit Switch
Lever Limit Switch is used for heavy duty EOT Cranes Wagon shunting devices etc., to prevent over travelling or over traversing on power and control circuit up to 500 volts AC 50 Hz and 10amps and 40 amps current rating.
Function: The lever Limit switch operates when its lever reaches its pre-determined position and the lever is moved over a projecting member fixed on the Girder The Limit Switch contacts are automatically reset when the lever returns to zero position due to spring action.
| Body Material | Aluminum casting |
|---|---|
| Enclosure | IP-54 |
| Mounting Position | Vertical |
| Cable Entry | ¾” Conduit |
| Rated Voltage | 500V |
| Thermal Test Current | 40 Amp |
| No. of contacts | 2/3/4 |
| Mode of operation | 2 way self resetting |
| Body Material | M.S. sheet |
|---|---|
| Enclosure | IP-44 |
| Mounting Position | Vertical |
| Cable Entry | ¾” Conduit |
| Rated Voltage | 500V |
| Thermal Test Current | 40 Amp |
| No. of contacts | 2/3/4 |
| Mode of operation | 2 way self resetting |
| Body Material | Black Nylon |
|---|---|
| Cover Material | Impact proof thermoplastic |
| Enclosure | IP-65 |
| Mounting Position | Any |
| Drive | Worm Drive |
| Cable Entry | ¾” Conduit |
| Contact Material | Double break silver cadmium |
| Wire Connection | Screw terminal |
| Rated Voltage Insulation | 500 V / A.C |
| Thermal Test Current | 16 Amps |
